Pneumatic Grippers

Pneumatic Grippers

The key parts of MH series grippers are manufactured by ourselves, from die-casting, aluminum profile precision draw, machining, casting's shot blasting, air tightness assurance through the impregnation by vacuum pressure process and passivation treatment, aluminum profile surface oxidation treatment,to assembling and testing, for better quality control. The cylinder covers, piston and piston rods are CNC machined, seals are from PARKER, to ensure the cylinders work stably and safely.

Description of Pneumatic Grippers





  • Products features:
    1. Parallel type, anti-dust type, point type is optional
    2. Fast reflection when it is clamped or loosened
    3. The distance and angle for clamp can be adjusted according to the appearance of the gripper, to control the cylinder stroke through magnetic sensor switch
    4. Speed adjustable equipment is within

    Specification

    Cyilnder Diameter(mm) 6 10 16 20 25 32 40
    Fluid Air
    Acting Mode Double action
    Single action：Normal open/Normal close
    Maximum Working-pressure 0.7MPa
    Maximum Working-pressure Double-acting 0.15 0.2 0.1
    Single acting 0.3 0.35 0.25
    Ambient and Medium Temprature -10~60℃
    Highest Working Frequency 180c·p·m· 60c·p·m·
    Repeated Accuracy (mm) ±0.01 ±0.02
    Magnetic Ring Within Cylinder  With（Standard）

    Note: 2)Lubrication

    		 No need
    Rc(PT)Joint Tube Caliber M3×0.5 M3×0.8