Rodless Cylinder

Rodless Cylinder

The key parts of CYB/S Series Rodless Cylinder are manufactured by ourselves, from die-casting, aluminum profile precision draw, machining, casting's shot blasting, air tightness assurance through the impregnation by vacuum pressure process and passivation treatment, aluminum profile surface oxidation treatment, to assembling and testing, for better quality control. The cylinder covers, piston and piston rods are CNC machined, the seals are from PARKER, to ensure the cylinders work stably and safely.

Description of Rodless Cylinder









  • Products features:
    1. No piston rod is pulled out. Piston rod is fixed on the cylinder according to magnetic power or mechanical fixing system. It is work under the pneumatic pressure
    2. Space-saving design
    3. Basic type CY1B and slide type CY1S is optional
    4. Magnetic ring can be in or out fixed
    4. Stroke is adjusted by bolt
    5. With oil pressure absorber

    Specification

    Cyilnder Diameter(mm) 6 10 15 20 25 32 40 50 63
    Fluid
    Air
    Acting Mode
    Double action
    Ensered Pressure Resistance
    1.05MPa(10.5kgf/cm2)
    Maximum Working-pressure
    0.5MPa(7.1kgf/cm2)
    Minnimum Working-pressure
    0.18MPa(1.8kgf/cm2)
    Ambient and Medium Temprature
    5~60℃
    Piston speed
    50~400mm/s
    *Cushion
    Rubber buffer on both ends
    Tolerance of Stroke
    0~250：，251~1000：，1001~
    **Lubrication
    No need
    Rc(PT)Joint Tube Caliber
    M5×0.8
    Rc(PT)1/8
    Rc(PT)1/4


     

    *Oil absorber is optional (only slide type--CY1S)
    ** If lubrication is needed, please use ISOVG3